Our Two Point Mounting Hardware clamps to each wheelchair backpost in one location, but has the stability of four point mounting. Two Point Mounting with Four Point Stability!
Angle – 20 degrees of adjustment without the loss of seat depth
Depth – range of adjustment is 1 1/4” / 31.75mm
Width – approx. 1” / 2.5cm
Aluminum and Carbon backs
Active, Deep, and Extra Deep contours
10” through 23” widths
Clamps to multiple diameter tubing (.600”/15.24 mm through 1”/25mm diameter tubing)
Round or oval, no spacers required!!!
CAD image of QR attached to 1” / 25mm back post
One handed operation; flip up release levers and remove the back!
Clamps to multiple diameter tubing. No Spacers Required!
Angle, Depth and Width Adjustable to fit YOUR everday needs.
Depth Adjustment – Behind back post
Depth Adjustment – Forward of back post